EyeCheck 3000

System	NVIDIA® Jetson Xavier NXTM
Camera	GenICam standard with USB3 Networking: 10/100/1000 BASE-T Ethernet, Media Access Controller (MAC) over M12 Connector USB: 2 x USB3 (max. bandwidth 5 GB, shared with camera, max. 900mA @ 5 V), 2 x MicroUSB for debug and recovery HDMI: HDMI 2.0a/b (up to 6Gbps), maximum resolution 3840 x 2160 at 60Hz (up to 32bpp) Inputs: 1 x Hardware Trigger, opto-decoupled 1 x Input to NVIDIA SoM, opto-decoupled Outputs: 4 x PWM 48V/2.5A, 1 x synchronized for flash, 3 x non synchronized, opto-decoupled UART: 1 x RS232, Rx/Tx only
Sensor	Sony IMX250 Gen2 Sensor Type: 2/3″ progressive scan CMOS Shutter: Global Shutter Auflösung: 2448 x 2048 pixels Scan Area: 8.44 mm x 7.06 mm Pixel Size: 3.45 µm x 3.45 µm
Image Signal Processor (ISP)	FPGA based for machine vision
Hardware Trigger	FPGA based for high speed/accurate image triggering
LED	FPGA based on trigger for syncronisation mit high speed, high power circuit, up to 2.5A @ 48 V
OS	Linux® based on Ubuntu 18.04 und NVIDIA® L4T 32.4.4

Try out the EyeVision Software for free and convince yourself!